Forum Replies Created

Viewing 15 posts - 1 through 15 (of 29 total)
  • Author
    Posts
  • in reply to: Quest 100% completion crash #170794
    mag046
    Participant

      I have a character parked on that specific quest.  I will continue to test.  Please let me know if you need anything else.

      Thanks!

      in reply to: Quest 100% completion crash #170792
      mag046
      Participant

        I installed the latest update 9.044.
        I unchecked Display -> ‘Anchored Small Frame’ checkbox.
        I left all other settings at default.

        Unfortunately, the guide/frame still produces the error.

        Thanks for the update!

        in reply to: Quest 100% completion crash #170790
        mag046
        Participant

          I have narrowed it down to the Display -> Anchored Small Frame setting.  I have left all other settings at default.

          If I uncheck the Display -> ‘Anchored Small Frame’ checkbox, the error is encountered repeatedly.

          I occasionally get the crash when just accepting the “Fighting Fire with… Water” (100%) quest used in the testing above.

          Possibly related or a by-product of the ‘Anchored Small Frame’ issue I reported in the other thread?

          in reply to: Quest 100% completion crash #170789
          mag046
          Participant

            With all settings enabled/checked, the guide progresses normally.  I have unchecked the checkboxes through ‘Show Ant Trail’ and no error encountered.  I will work through this more today as I have time.

            There are a lot of settings combinations to try considering it may be one or a combination of multiple. I am at a loss as to why I could previously reproduce the error, multiple times, on multiple computers by unchecking/rechecking the ‘Icon Arrow’ box.

            in reply to: Quest 100% completion crash #170786
            mag046
            Participant

              1. Installed guide version 9.043.
              2. WTF purge of account folder while logged out of client.
              3. Log back into the client/game/character with guide enabled.
              4. Configured guide settings as follows:

              • Questing -> uncheck ‘Floating Item Button’ and ‘Auto Quest Tracking’
              • Dugi Arrow -> uncheck ‘Show Ant Trail’ and ‘Icon Arrow’
              • Dugi Zone Map -> uncheck ‘Enable Zone Map’
              • Display -> uncheck ‘Anchored Small Frame’ and ‘Fixed Width Small Frame’
              • Frames -> uncheck ‘Small Frame Border’
              • Maps -> uncheck ‘Hide Border’
              • Taxi System -> default selections
              • Target Button -> uncheck ‘Target Button’ (default unchecks all below)
              • Tooltip -> default selections
              • Gear Set -> default selections
              • Gear Scoring -> default selections
              • Gear Finder -> default selections
              • Auto Mount -> default selections
              • Notifications -> default selections
              • Other -> uncheck ‘CTRL + Right Click Arrow Menu’
              • Guide Sharing BETA -> Uncheck ‘Enable Guide Sharing’
              • Profiles -> default selections

              5. Waking Shores guide quested until I got to “Fight Fire with… Water” (100%).
              6. Completed the quest to 100%, error encountered.
              7. Reloaded the UI via the LUA error window and the guide advanced.
              8. Abandoned the quest.
              9. Re-checked ‘Icon Arrow’.
              10. Completed the quest to 100%, error encountered.  Did not encounter in previous testing.

              I am going to reset the guide settings to default and work through the quest as I uncheck them one-by-one and test further.

              in reply to: Quest 100% completion crash #170785
              mag046
              Participant

                I use no other addons.

                This issue does not occur with Dugi Guides disabled.

                Please provide me with an exact quest that is a 100% completion quest that I can use for testing.  At this point I have only used natural progression through the guide until I find a completion quest resulting in significant delays in providing examples.

                in reply to: Quest 100% completion crash #170778
                mag046
                Participant

                  Ozzi said:

                  mag046 said:
                  What am I looking at?
                  I see that you are on Slay Fyrakk’s Forces (100%), It’s already established that I am on the same page for the type of quest you mean.
                  Confused with the circle around the waypoint..
                  This is exactly what I mean, it looks like you provided a screenshot because you were asked to provide one. Regardless if it would help or not, in this case, complete waste of my time to look at this .. what ever it is.

                  What you are looking at is the exact issue.  It was staring me in the face the entire time.  As you can see in the screenshot I provided:

                  1.  The guide crashed, and didn’t advance.
                  2.  The arrow did advance.

                  The issue can be reproduced by unchecking ‘Dugi Arrow’ -> ‘Icon Arrow’.  Leaving ‘Dugi Arrow’ -> ‘Icon Arrow’ checked, the guide proceeds successfully.

                  Your suggestions had no effect on resolving the issue.

                  in reply to: Quest 100% completion crash #170782
                  mag046
                  Participant

                    The issue is not specific to one guide.  The error just happened again on the “Slay Fyrakk’s Forces” completion quest.  Same exact error, completely different zone and guide.

                    As frustrated as you may be, I am simply trying to help make the guide better for everyone.  Your response was uncalled for.

                    in reply to: Quest 100% completion crash #170773
                    mag046
                    Participant

                      It has happened again, this time producing an error window.  This error was encountered upon reaching 100% completion doing the “Dijaradin Defenses Disrupted” quest. – Edit:  I also just noticed that the lua line numbers in this error appear to be the same as I previously reported.  This issue has to be related to a guide configuration as I am not running any other addons and the installation was clean with a WTF folder purge.
                      -<removal of spam> Edited by Ozzi-

                      in reply to: Anchored small frame issue #170770
                      mag046
                      Participant

                        Your guide (and support) is essential to my play style and I am honestly miserable without it.  I can now enjoy the story and environment during the limited time I have to play.

                        Thank you!

                        in reply to: Pet Tracking #170769
                        mag046
                        Participant

                          The issue can also be HandyNotes, depending on the modules you have loaded.

                          in reply to: Quest 100% completion crash #170768
                          mag046
                          Participant

                            I have done some questing and while I am not receiving the crash error any longer, the guide freezes on 100% completion quests.  I don’t notice it right away and then wonder why the guide steps aren’t advancing.  I then /console reloadui, the guide immediately spins and progresses.  The questing was in Shadowlands and now in Dragonflight.

                            in reply to: Anchored small frame issue #170765
                            mag046
                            Participant

                              I have also used the ‘Multi-step’ Preset and that works also… until you change a checkbox then the issue returns.

                              Thank you! 

                              in reply to: Anchored small frame issue #170763
                              mag046
                              Participant

                                I have discovered the issue is related to the ‘Objective Tracker Frame Border’.  Toggling this checkbox can easily replicate the issue by toggling the ‘Anchored Small Frame’ checkbox.

                                in reply to: Quest 100% completion crash #170762
                                mag046
                                Participant

                                  I’ve been away.  I just updated to the 9.0.42 release.  There is a major issue that I will create another post for.  I will also test out the completion issue.

                                Viewing 15 posts - 1 through 15 (of 29 total)